Master Tools

This set includes 2 chains in two different types, 1 piece each. Each chain is 40 cm long. Each link at Type A is 0,8 mm in Diameter and 1,5 mm long. Type B is 1,1 mm in Diameter and 2,0 mm long.

This set includes 2 brass wires in two different types, 1 pieces each. Eachwire  is 55 cm long. Type A is a rope with 0,8mm Diameter, Type B is a wire with 0,35mm Diameter.

Can be used for any scale and subject of modelling. For Tanks, ships and so on.

Simple two-part plastic tray and a "lifter" makes working with decals easy ! The inner tray has a grated bottom, to allow water to drain through.

Trumpeter Display Stand for many different purposes. Can be used for displaying airplane-models, military-models car-models etc.

Set includes:
- Straight edge - 16mm in width, 18cm in length, can be cut in any length and angle
- Card type - 9x5cm card type, has 5mm grid lines aside from the straight edge measurements
- Protractor - 2 degree angle measurement and 5mm intervals for small measurements

Set includes:
- Straight edge - 16mm in width, 18cm in length, can be cut in any length and angle
- Card type - 9x5cm card type, has 5mm grid lines aside from the straight edge measurements
- Protractor - 2 degree angle measurement and 5mm intervals for small measurements

This set contains six tools for making handles from 0.3 or 0.4mm wire. There are three tools each for 0.3 and 0.4mm wire to make handles in width 3, 4 and 5mm.

Trumpeter Hobby Knife with 5 assorted interchangeable blades.

Hobby Line Engraver from Trumpeter.

Trumpeter Mini Razor saw with 3 different blades.

Rivet Maker with 4 different spaces of the rivets (different rollers / blades).

Trumpeter Hobby Side Cutter for plastic.

With light weight , this Mini Vise is portable and easy to use. It was used Aluminum Alloy for it's clamp and high quality of composite plastic for it's frisker to reduce the weight and increase is practicability. This Mini Vise is with two types of liner plate for use, it's very useful for drilling work.

This Mini Vise also matches to the Bench Drilling Machine (08505).

With light weight, this fixed Mini Vise is portable and easy to use. It was used by Aluminum Alloy for it's clamp and high quality of composite plastic for it's frisker to reduce the weight and increase it's practicability. This Mini Vise is with two types of liner plate for use, it's very useful for the driller-work. Also it can be rotated with 360° and leaned it to 45°.

Trumpeter Model Clamps, includes two clamps in different versions, one with flat surface and one with tooth surface. A Base for holding the clamps is also included.

Includes four different Paint Trays, two different shapes.