Masking Fluid - 20g

Masking Fluid

This light green masking fluid is ideal for protecting areas where traditional tape might struggle, such as complex curves, intricate shapes, or challenging surface textures. It can be applied directly from the bottle, ensuring precise application with minimal dripping. Perfectly compatible with Tamiya Color paint products.  

Bottle contents: 20g  

Instructions for Use:
1. Clean the target surface with detergent to remove any oil or residue.  
2. Apply the masking fluid directly from the bottle and allow it to dry completely.  
3. Once dry, trim the fluid on the area to be painted and remove any unnecessary sections before painting.  
4. After the topcoat is fully dry, peel off the masking fluid.  

Tips for Best Results:
- Always apply the fluid after the base coat has completely dried.  
- Use a thin layer for faster drying (approximately 30 minutes). Thicker layers will take longer to dry.  
- When trimming dried masking fluid, use a fresh modeling knife blade and secure any loose edges to avoid lifting.  
- The fluid is water-based, so take extra care when applying it over water-based paints.  
- Be aware that removing the fluid from highly detailed or complex surfaces may be more challenging.  
- Handle the bottle carefully to prevent accidental leaks. If the nozzle becomes clogged, detach and clean it thoroughly.